Comparison of PMMA and SU-8 resist moulds for embossing of PZT to produce high-aspect-ratio microstructures using LIGA process

In this paper results are presented from a range of experiments to explore the feasibility of inserting a ceramic material PZT (lead zirconium titanate) into different kinds of high-aspect-ratio resist moulds. Polymethylmethacrylate (PMMA) and SU-8 on silicon substrates and free-standing SU-8 membranes with micro-cavities or through-holes (defined by X-ray lithography) have been used as moulding medium. Processing conditions for the resist materials including pre-bake, exposure, post-bake, development and stripping have been compared. The advantages of different types of resist mould for the LIGA process has been evaluated. Additionally a comparison of photosensitivity of PMMA and SU-8 has been carried out. Using a range of load pressures (5 to 60 MPa), appropriate conditions for PZT embossing into resist moulds have been determined (ensuring minimum void formation in the final PZT structures). In the final form, SU-8 moulds have been removed by laser ablation. This is the first reporting of high-aspect-ratio ceramic microstructures fabricated using a combination of SU-8 moulds and PZT embossing.