logo
    A metrological scanning force microscope used for coating thickness and other topographical measurements
    Applied Physics A (1998)
    M. BieniasSheng GaoΚ. HascheR. SeemannK. Thiele
    41
    Citation
    0
    Reference
    10
    Related Paper
    Citation Trend
    Keywords:
    Scanning Force Microscopy
    Topics:
    Advanced Measurement and Metrology Techniques
    Adhesion, Friction, and Surface Interactions
    Surface Roughness and Optical Measurements
    Effect of Al2O3 and MoS2 reinforcement on microstructure, mechanical, and wear properties of plasma sprayed aluminium hybrid composite coating
    Materials Today Communications (2023)
    Chintham SatishK. Vijay KumarSuraj PrasadP. Sai KiranObaidur Rahman
    Citations (11)
    In situ synthesized high volume fraction WC reinforced Ni-based coating by laser cladding
    Materials Letters (2017)
    Da ShuZhuguo LiKe ZhangChengwu YaoDayong Li
    Volume fraction
    Cladding (metalworking)
    Powder mixture
    Citations (126)
    High temperature wear behavior of NiCoCrAlY-Cr2O3-AgMo coating on GH4169 superalloy
    Materials Today Communications (2023)
    Jie WangYanchao ZhangYahui CuiHaitao HuLong Zhang
    Citations (7)
    Investigation of the properties of the Cr,Mo-(Cr,Mo,Zr,Nb)N-(Cr,Mo,Zr,Nb,Al)N multilayer composite multicomponent coating with nanostructured wear-resistant layer
    Wear (2020)
    Sergey N. GrigorievAlexey VereschakaFilipp MilovichNikolay SitnikovNikolay Andreev
    Diffusion barrier
    Citations (43)
    Study of W-Co ODS coating on stainless steels by mechanical alloying
    Surface and Coatings Technology (2018)
    Chun‐Liang ChenSutrisna
    Citations (13)
    Microstructure, mechanical and tribological properties of WC-WCoB coating
    Journal of the European Ceramic Society (2018)
    Haibin WangXi‐Feng YanXuemei LiuHao LüChao Hou
    Citations (32)
    Excellent wear resistance of plasma-sprayed amorphous Al2O3–Y3Al5O12 ceramic coating
    Surface and Coatings Technology (2017)
    Kai YangJian RongJingwei FengYin ZhuangHuayu Zhao
    Superplasticity
    Supercooling
    Citations (36)
    In-situ formation of TiC particles reinforced Ni_3(Si,Ti) composite coating produced by laser cladding
    Materials Science and Technology (2008)
    Dai Jing-jie
    The laser cladding technique was used to form Ni3(Si,Ti) composite coating reinforced by in-situ formation TiC particles on GH864 Ni-based alloy substrate.By means of SEM,EDAX and XRD,the effect of(Ti+C) addition on the microstructure and microhardness of the coating was investigated.The experimental results show that an excellent bonding between the coating and the substrate can be ensured by the strong metallurgical interface.The clad coating is very good and free from cracks and pores.The microstructure of the coating is mainly composed of Ni(Si),Ni3(Si,Ti) and TiC.The average microhardness of the coating is improved in terms of addition quantity of TiC in coating structure.When the addition quantity of(Ti+C) is 20wt%,the microhardness of coating was up to 780Hv that is 2.4 times of the substrate.
    Cladding (metalworking)
    Citations (0)
    Metrological Atomic Force Microscope with Zero Abbe Offset
    Zhao Ke
    It was in 1997 that a metrological atomic force microscope (AFM) was developed. But there is an Abbe offset in the AFM and the Abbe offset in x and y directions are 2～3 nm. A new improvement is reported. The experiment results show that the uncertainty of the metrological atomic force microscope is improved from U =5 nm+2×10 -4 L to U =2 nm+1×10 -4 L (L is the distance between two points) as the Abbe offset has been successfully eliminated in three dimensions.
    Dimensional Metrology
    Citations (0)
    Structure-mechanical Characteristics of Al metal Coating/PET Composites
    Materials Science and Engineering (2003)
    HE Jiang-ping
    Citations (0)