Width gauge for hot steel plates by laser-scanning rangefinder
0
Citation
0
Reference
10
Related Paper
Abstract:
The authors developed a new advanced laser scanning range finder. The width gauge consists of a pair of these range finders. Conventional gauges cannot measure the effective width of complexly shaped plate edges. However, the gauge measures both side profiles of a plate and calculates the effective width with an accuracy of +/- 1.5 mm. This new type of width gauge has been developed and tested at the plate rolling mill at Kashima Steel Works of Sumitomo Metal Industries Ltd.Keywords:
Rolling mill
Cite
Owing to improvement of rolling mill practice.,the vertical rolling mill main drive system of some plant must endure more roll torque. Therefore, the strength of the vertical rolling mill main drive system become a concern problem. In this paper, the dynamic property of the rolling mill mai drive system can be found. Therefore, this article provides credible evidence for rolling mill's safe operation on heavy loads.
Rolling mill
Torsional Vibration
Cite
Citations (0)
To increase the production capacity and improve the flatness device of the 1 500 mm cold rolling mill,the flatness control system of the mill has been reformed and upgraded.The reformation of the mill is made on the production experiences of the similar mills,so as to make the mill works properly and no problems happen.The problems appeared during the reforming and the solution measures have been put forward,to which the attention must be paid to.
Flatness (cosmology)
Upgrade
Rolling mill
Cite
Citations (0)
It is known that speed and current or tension variations have an effect on output gauge. At present, the relationship is not clearly defined and it is difficult for practising engineers to estimate the effect of speed and current or tension variations on gauge accuracy and to specify control accuracy requirements. In this paper, a method of estimating the gauge deviation due to speed and current or tension error is proposedfor cold steel mills. The proposal is based on the method of calculating roll separating force suggested by Stone, and design practice for cold steel rolling mills.
Reversing
Tension (geology)
Rolling mill
High tension
Cite
Citations (0)
Based on the fundamental of auto gauge control,combined with the characteristics of reversible single stand cold rolling mill,the project of gauge control system is brought forward.The feed forward AGC,Smith- predict monitor AGC,GM-AGC,gauge compensation during acceleration and deceleration in the gauge control sys- tem are detailed analyzed and studied.Aiming at the problems encountered in practical application,specific solve schemes are presented and executed in site.The application result indicates that the relative gauge error of product is within±1%,satisfying the requirement of production.
Rolling mill
Cite
Citations (0)
The development and characteristic of short-stress-path rolling mill are introduced in this paper.Parameterization design,structural optimization method and trend of development for this rolling mill are indicated through comparing the national mill with foreign mill.
Rolling mill
Cite
Citations (0)
This paper introduces the imported automatic gauge control system for a 1600mm singlestand cold mill rolling aluminium plate and strip. The gauge control mathematical models, the controlfunctions and the realization of the system are interpreted. In the end, the effects of several sorts ofgauge control function for rolling plate and strip are analysed.
Rolling mill
Realization (probability)
Cite
Citations (0)
The paper analyzes in detail the causes of fire of the modem aluminum strip and foil rolling mill based on the practical investigated results,and according to the characteristics of modern aluminum strip and foil rolling mill,puts forward a series of measures for preventing the rolling mill from firing.
Aluminum foil
Rolling mill
Cite
Citations (0)
Rolling mill
Micrometer
Cite
Citations (1)
Rolling mill
Cite
Citations (0)