Ferroelectric properties of epitaxial barium titanate thin film capacitors on silicon substrate

Abstract A heteroepitaxial BaTiO3 film with a thickness of 65 nm was prepared on SrRuO3/Pt/TiAlN/Si. The Ti0.91Al0.09N film was grown on Si substrate by DC sputtering in Ar/N2 ambient at 700°C. The BaTiO3, SrRuO3 and Pt films were deposited by radio-frequency magnetron sputtering at substrate temperatures ranging from 450°C to 600°C. The BaTiO3 film has a c-axis 1.6% longer (0.410 nm) than that of bulk, due to lattice misfit between SrRuO3 and BiTiO3. When positive and negative voltage pulses with an amplitude of 5 V were applied, a switching charge density, Q sw, of 40 μC/cm2 was obtained. No fatigue was observed after 1011 cycles of polarization switching even when an amplitude of 7 V was applied. Remanence of polarization for 4 hours was confirmed in a retention test. These results indicate that the heteroepitaxial BaTiO3 film capacitors on Si substrates can be used for ferroelectric nonvolatile memory applications.