Optical investigations in a PEM controlled reactive magnetron sputter process for aluminium doped zinc oxide layers using metallic alloy targets
2003
The use of aluminium doped zinc oxide (ZAO) as transparent conductive layer (TCO) has growing importance especially for production of solar modules. A significant cost reduction of TCO thin film production is expected by use of much less expensive metallic alloy targets. ZAO films with good TCO properties can be achieved only in the transition mode of the reactive sputter process. To stabilize the discharge for long stretched magnetron sputter sources on the working point needed a process control system is required. The intensity of zinc emission lines is used as control parameter. The control is performed by adding varying amounts of oxygen gas to the discharge region using the Plasma Emission Monitor PEM®05. This allows a combination of reproducible TCO film properties with stable high deposition rates. By use of an optical emission spectrometer AOS-4 it was investigated in situ, which emission lines are best suited for the process control. Herefore the chronogram mode of the spectrometer is used, which allows spectral lines to be monitored with a time resolution of a few milliseconds. Furthermore, other spectral line intensities are investigated for use as regulation parameter. A concept for regulating a reactive sputter process by use of several emission lines is discussed. The concept was applied for DC discharge and MF discharge as well. A time-resolved investigation of the interesting spectral lines in MF discharge is carried out with microsecond resolution.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
3
References
24
Citations
NaN
KQI