Development of a voice coil motor based fast tool servo with a function of self-sensing of cutting forces

Abstract This paper presents a fast tool servo (FTS) driven by a voice coil motor (VCM) with a function of self-sensing of cutting forces. Conventionally, cutting force measurement associated with a FTS system is made by integrating an additional force sensor or a dynamometer, which would make the system complicated and influence the dynamic performance of the FTS. Differing from the conventional method, the force measurement in the proposed system is achieved by detecting the current of the VCM and then obtaining the cutting force based on the electromagnetic field distribution of the VCM. Since it is not necessary to integrate additional force sensors, the main body of the FTS could be compact and the dynamics of the FTS would not be influenced by the added function of force measurement. The FTS mainly consists of an air bearing guide driven by a VCM with a stroke of 2.5 mm, an optical encoders feedback system for precision positioning and a hall current sensor for current measurement. To obtain forces from the measured currents, the magnetic field distribution of the VCM is figured out and the nonlinear relationship between the position and the magnetic field distribution is corrected. The basic performances of the FTS for positioning and force measurement were experimentally investigated. It is shown that the system could have a positioning resolution of 20 nm and a force self-sensing resolution of 5 mN based on the proposed method. The proposed method provides a new way for in-process cutting force measurement associated with FTS systems.