Effects of Seat-Back Angle and Accelerometer Height at the Seat-Back on Seat-Back X Axis r.m.s. Acceleration in Filed Experiments according to The ISO2631-1 Standard

The effects of seat-back angle and accelerometer height at the seat-back on seat-back x-axis frequency-weighted root-mean-square (r.m.s.) acceleration have been investigated in field experiments. Experiment 1 investigated the range and variability, of frequency-weighted r.m.s. acceleration at the same measurement position, where the seat-back angle was 24 degrees from vertical on the floor and the accelerometer height was 38 cm up from the seat cushion surface. Experiment 2 investigated ranges of frequency-weighted r.m.s. acceleration between the reference position, which was the position used in experiment 1, and test positions at different seat-back angles, 4 degrees ahead of and 4 degrees behind the reference position. Experiment 3 investigated the range of frequency-weighted r.m.s. acceleration between the reference position which was the same as in experiments 1 and experiment 2, and test positions at different accelerometer heights at the seat-back from a seat cushion surface, 2.5 cm higher, 2.5 cm lower and 5 cm lower than the reference position. This investigation clarifies that different seat-back angles and accelerometer heights at the seat-back affect the frequency-weighted r.m.s. acceleration at these measurement positions, which is beyond the exposure values at which people are able to distinguish different vibration acceleration magnitudes. Language: en