Experimental and FEM analysis of mar behavior on amorphous polymers

Abstract Mar is a type of subtle surface damage caused by a sliding object barely visible to human eyes. This minor damage phenomenon has rarely been systematically studied. Significant research efforts for the fundamental understanding of mar behavior in polymers are still needed. In this study, the mar behavior of a series of model amorphous polymers, i.e., polymethylmethacrylate (PMMA), polycarbonate (PC), and polystyrene (PS), were investigated based on a modified ASTM/ISO scratch testing methodology and a corresponding finite element method (FEM) modeling. Furthermore, the mar-induced visibility and material parameter relationships were established through a systematic FEM parametric study. Experimental results show that PMMA has the highest mar visibility resistance, indicated by lower surface roughness variation and low contrast between marred region and the background. The numerical analysis showed that the maximum principal plastic strain ( e 1 p ) and total dissipated plastic energy ( E p ) can be considered for evaluating mar visibility resistance. Higher mar visibility resistance corresponds to lower e 1 p and E p values. Based on these two criteria, the parametric analysis shows that mar visibility resistance increases with lower modulus, higher yield stress, higher hardening slope, and lower softening slope. The usefulness of the present study for the preparation of mar resistant polymers is discussed.