Prediction on the flexural deflection of ultra-high strength rebar reinforced ECC beams at service loads

Abstract To reduce the amount of reinforcement and control crack width, ultra-high strength rebar reinforced Engineered Cementitious Composites (UHSRRE) beams are considered a promising choice. A model is developed for predicting the flexure deflection of UHSRRE beams in service stage based on internal force equilibrium and the compatibility of deformation. In this model, the bilinear stress–strain model for Engineered Cementitious Composites (ECC) and ultra-high strength rebar is adopted, and the tensile zone of UHSRRE beams is considered. The flexure tests of seven beams with different reinforcing ratios and matrix materials are carried out for verifying the proposed model. It is observed that the experimental results are basically consistent with the predicted results. This model can provide a useful tool for the calculation of deflection. Additionally, parametric analysis is conducted to analyze the influence of reinforcement bars and matrix materials on the bending deformation of UHSRRE beams. Through comparison of the results, it is found that using higher strength grade bars not only reduces the amount of reinforcement but also maintains excellent bending performance.