Correlation of Defects on Dielectric Surfaces with Large Particle Counts in Chemical-Mechanical Planarization (CMP) Slurries Using a New Single Particle Optical Sensing (SPOS) Technique
2005
A dual-sensor single particle optical sensing method (SPOS) is described for the measurement of the large particle count (LPC) in fumed silica polishing slurries. LPC values were expressed on a silica sphere-equivalent diameter scale rather than a polystyrene latex-equivalent size basis. Linear correlations between LPC and scratch counts on SiO 2 surface films for wafers polished under clean room and table-top CMP conditions are demonstrated. However, these correlations were obtained for a limited set of model slurries; and further investigation will be needed to assess the general applicability of dual-sensor SPOS for oxide scratch defect prediction in CMP slurries.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
4
References
5
Citations
NaN
KQI