Highly Biased Linear Condition Method for Separately Extracting Source and Drain Resistance in MOSFETs
2018
A highly biased linear current method (HBLCM) for separately extracting source and drain resistance ( ${R}_{S}$ and ${R}_{D}$ ) in MOSFETs is proposed. The technique can be applied to a single device by using simple modeling. Compared to other methods, it provides accurate values of ${R}_{S}$ and ${R}_{D}$ because it considers carrier mobility degradation. The method basically uses linear current versus gate voltage ( ${I}_{\text {DS}} - {V}_{\text {GS}}$ and ${I}_{\text {SD}} - {V}_{\text {GD}}$ ) characteristics before and after the source/drain interchange ( ${I}_{\text {DS}}$ and ${I}_{\text {SD}}$ ). Afterward, by using the traditional Y-function and subsequent resistance modeling in a highly biased linear condition, ${R}_{S}$ and ${R}_{D}$ can be separately extracted. In order to evaluate and verify the accuracy of HBLCM, an external resistor was intentionally connected to a source electrode of a device, and the resulting change in source resistance was detected using the proposed method. Moreover, to demonstrate an application of the proposed method, internal resistance deliberately created by hot-carrier injection (HCI) was linked to a drain electrode, thereby changing drain resistance. The changed drain resistance was also sensed by the HBLCM. Afterward, the HCI-stressed device was cured by electrothermal annealing driven by Joule heating, and the recovery was again clearly observed using the proposed method.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
19
References
4
Citations
NaN
KQI