Calibration and alignmenttechniques for automated inspection of printed circuit patterns
1991
Abstract A system calibration and part alignment approach for inspection of printed circuitpatterns is presented. We describe procedures for optical and X-Y stage calibration, for axis of rotation estimation, and for correction of nonuniformity in pixel sensitivity. Features are detected with fast and robust techniques that reduce the likelihood of spurious detection. In addition, calibration feature detection is conducted at two different image regions to verify authenticity. This relaxes constraints for a completely contamination-free calibration part. The axis of rotation is calculated by rotating clockwise and counterclockwise and measuring corresponding calibration features. Measurement of rotation during this step and in the alignment procedure is obtained by mapping a quadrilateral in 2-D measurement space onto a rectangle to compensate for minor global variations in part height. This also makes the alignment procedure independent of knowledge of the physical coordinates of the features that define the rectangle's vertices. Analytical solutions for the measurement of rotation and the axis of the rotation are presented. Good results have been obtained in a prototype inspection define the rectangle's vertices. Analytical solutions for the measurement of rotation and the system.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
10
References
3
Citations
NaN
KQI