Update of >300W high power LPP-EUV source challenge for semiconductor HVM

Gigaphoton develops CO2-Sn-LPP EUV light source which is the most promising solution as the 13.5nm high power light source for HVM EUVL. Unique and original technologies including; combination of pulsed CO2 laser and Sn droplets, dual wavelength laser pulses for shooting and debris mitigation by magnetic field have been applied. We have developed first practical source for HVM; “GL200E” 1) in 2014. Then it is demonstrated which high average power CO2 laser more than 20kW at output power in cooperation with Mitsubishi Electric2). Pilot#1 is up running and it demonstrates HVM capability; EUV power recorded at 111W on average (117W in burst stabilized, 95% duty) with 5% conversion efficiency for 22 hour operation in October 20163). Availability is achievable at 89% (2 weeks average), also superior magnetic mitigation has demonstrated promising mirror degradation rate (= 0.5%/Gp) at 100W or higher power operation with dummy mirror test. We have demonstrated >300W operation data (short-term) and actual collector mirror reflectivity degradation rate is less than 0.15%/Gp by using real collector mirror around 125W (at I/F clean) in burst power > 10 Billion pulses operation4). Also we will update latest challenges for >250W average long-term operation with collector mirror at the conference. REFERENCE 1) Hakaru Mizoguchi, et. al.: “Sub-hundred Watt operation demonstration of HVM LPP-EUV source”, Proc. SPIE 9048, (2014) 2) Yoichi Tanino et.al.:” A Driver CO2 Laser Using Transverse-flow CO2 Laser Amplifiers”, EUV Symposium 2013, ( Oct.6-10.2013, Toyama) 3) Hakaru Mizoguchi, et al: ” High Power HVM LPP-EUV Source with Long Collector Mirror Lifetime”, EUVL Workshop 2017, (Berkley, 12-15, June, 2017) 4) Hakaru Mizoguchi et al.:” Challenge of >300W high power LPP-EUV source with long collector mirror lifetime for semiconductor HVM”, Proc. SPIE 11323, Extreme Ultraviolet (EUV) Lithography XI (2019) [11323-28]