Preliminary Flight Data From the Materials Exposure and Degradation experiment (MEDET)

The Materials Exposure and Degradation Experiment (MEDET) was recently launched to the ISS on Space Shuttle Flight IE, as part of the EuTEF payload on the external payload facility of ESA’s Columbus module. The experiment will operate in‐orbit for at least 1.5 years, and has the overall objectives of evaluating the effects of the complex low Earth orbit space environment on material properties, investigating material degradation due to contamination, characterising the local ISS environment and measuring the local micro‐particle flux. This paper gives a brief overview of the experiment function and the material samples which are being exposed, before presenting some of the early flight data. In this phase of the mission, all of the instruments are operating successfully, and continuously acquiring data. The preliminary results mainly concern the environmental sensors, which are operating at relatively high acquisition rates (e.g. one reading every few seconds). It has been shown that the docking of the Sp...