Structural and optical properties of CuAlTe2 thin films prepared by RF. sputtering

2005 
CuAlTe2 films have been prepared by sputtering onto water-cooled glass substrates and then heat treating under vacuum. The as-grown films exhibit p-type conductivity and a chalcopyrite structure with a preferential orientation in the (112) direction. The best crystallinity of the films was observed after annealing at 300°C. For these films, the lattice constants were found to be: a = 5.62 A and c = 12.45 A. However, the approximate value of the grain size may vary bettween 60 and 120 nm from the SEM picture. The direct band-gap value at room temperature was found to be 2.45 ± 0.02 eV for heat-treated films at 300°C.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    12
    References
    4
    Citations
    NaN
    KQI
    []