Meta-model based optimization of a large diameter semi-radial conical hub engine cooling fan
2013
Turbomachinery design is an iterative process that can be time-consuming and expensive, especially when an extensive knowledge of the performance envelope is required. The approach described in the present paper can significantly cut the turnaround times down without jeopardizing the accuracy of the final result. A parameterization technique based on radial basis functions (RBF) is used and Reynolds Averaged Navier-Stokes (RANS) simulations are subsequently performed on a set of selected morphed meshes, the goal of which is to produce an aerodynamic database containing first-order, second-order and second-order cross derivatives of objectives with respect to parameters. New solutions, corresponding to any variations of the selected parameters, can thus be extrapolated thanks to the information included in the aforementioned database. In this way, a meta-model is built and can be easily explored by a genetic algorithm. This approach has been experimented on a new concept of engine cooling fan featuring low torque and high efficiency. A reference fan design has been adapted for the particular surrounding of the vehicle underhood, where the downstream flow is radially deviated from its axis by the engine. The optimization process has resulted in an efficiency improvement of three points for one of the obtained optima.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI