Precise Orbit Determination of the China Seismo-Electromagnetic Satellite (CSES) Using Onboard GPS and BDS Observations

The Global Navigation Satellite System (GNSS) occultation receiver onboard the China Seismo-Electromagnetic Satellite (CSES) can provide dual-frequency observations for both GPS and BDS-2 satellites. In this study, the data quality and orbit determination performance of the CSES are assessed. Severe data loss of about 30% is observed in GPS P2/L2 data, resulting in only 11% of epochs possessing six to eight useful GPS satellites. Due to fewer channels being allocated for BDS signals, less than 5% of epochs have more than three useful BDS satellites. Precise orbit determination (POD) of CSES is firstly carried out using GPS data. The results indicate that the orbit overlap differences improved from 3.65 cm to 2.8 cm in 3D root mean square (RMS) by antenna phase center correction. CSES orbits are then derived from the BDS only, and combined GPS and BDS data. BDS-based POD indicates that adding BDS geostationary Earth orbit (GEO) satellites could dramatically degrade the orbit accuracy. When excluding BDS GEO satellites, the orbit overlap differences of BDS-based and combined POD are 23.68 cm and 2.73 cm in 3D, respectively, while the differences compared with GPS-based POD are 14.83 cm and 1.05 cm, respectively. The results suggest that the obtained orbit can satisfy centimeter-level requirements. Given that large GPS tracking losses occurred and few channels are allocated for BDS signals, it is expected that POD performance can be further improved by increasing the number of dual-frequency observations.