The effect of storage media upon the surface microhardness and abrasion resistance of three composites
1990
Abstract The effects of various storage media [distilled water, lactate (pH 4.0), and citrate (pH 6.0) buffers] upon the hardness and wear factor values of three composites [Occlusin (O), P-30 (P), and FulFil (F)] were studied. Over the one-year storage period, the hardness of all three materials stored in citrate buffer was unchanged. In the case of P in water and all materials stored in lactate buffer, a reduction was observed. There was no significant difference (P > 0.05) between the wear factors of specimens after one year or one week of water storage. Specimens of F stored in citrate buffer had a wear factor (P A reduction in surface hardness for some materials did not result in an increase in wear rate. This indicates that the softening effect was limited to a thin surface layer. Although not significant in vitro , this effect would probably increase the rate of in vivo wear, since the softened material would be lost, exposing a fresh surface to further attack. This would adversely prejudice the material's long-term clinical durability by impairing its resistance to abrasion.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
14
References
110
Citations
NaN
KQI