Study of wind-toughness of metal arc welding with reference to multi-pass weld metal quality

AbstractThe maximum cause to make mechanical toughness of a weld metal reduce in process management is known to be a mixture of nitrogen including in the atmosphere by breaking the shield condition. Mixture of the atmosphere is prevented by blowing the shielding gas such as carbon dioxide, argon, and this mixture to the arc and the molten pool in gas metal arc welding, but it is easily affected by wind. Therefore, it has been recommended conventionally that wind velocity should be controlled to less than 2.0 m/s. But it is thought that this recommendation value is unsuitable to produce multi-pass weld metal with high mechanical and porosity toughness properties because this was provided from examination results by only consideration of porosity toughness of single-pass weld metal but non-consideration mechanical toughness. In this paper, the shielding condition is evaluated not only chemical analysis and mechanical properties of multi-pass weld metal in some velocity wind environment but also visualizing ...