Determination of Sulfite in Food by Liquid Chromatography Tandem Mass Spectrometry: Collaborative Study

: Sulfites are added to a wide range of food and beverage products to prevent browning or oxidation. Although most of the population do not experience side effects from consuming sulfites, a small subset has been shown to experience an "allergic-like" response. For this reason, the U.S. Food and Drug Administration requires that sulfites be labeled on all products that contain more than 10 mg/kg (parts per million) sulfur dioxide. The current regulatory method, optimized Monier-Williams (OMW) Official Method 990.28, has been successful in quantifying sulfites in most matrixes, but is time-consuming and has a method detection limit at the regulatory-labeling threshold. Recently, an LC-tandem MS (MS/MS) method was published that was applicable to a wide range of sulfite-containing matrixes. This method converts free and reversibly bound sulfite to the formaldehyde adduct hydroxymethylsulfonate, which could then be separated from matrix constituents using a hydrophilic interaction LC analytical column and subsequently be detected with tandem MS (MS/MS). In this study, multilaboratory validation was conducted with 11 laboratories in the United States and Canada. Four matrixes were spiked at varying concentrations and three additional commercially sulfited matrixes were included. An abbreviated comparison study between the LC-MS/MS and OMW methods was conducted for select samples. Average recoveries for all matrixes ranged from 86 to 114% with RSDr and RSDR values of 4.5-17.5 and 8.6-22.5%, respectively. Further comparisons will be necessary to draw comparisons between the two methods. This method proved to be a faster and more sensitive way to determine sulfites in food and beverages, showing promise for the continuing improvement of enforcement of sulfite labeling requirements to protect individuals who have sulfite sensitivity.