Co/Pt Disks with a Simplified Structure.
1997
Potentially low cost Co/Pt multilayer disks were fabricated using a simplified disk structure. Ultrathin seed layers of dielectrics were used to enhance the coercivity and squareness of the Kerr hysteresis loop. Both Co/Pt superlattices and the dielectrics were deposited under low vacuum. The total cycle time consisting of loading the PC substrate into the vacuum chamber, pumping the sputtering chamber to a base pressure, and deposition of the ITO seed layer and the Co/Pt multilayer was reduced to less than ten seconds. Cyclability and recording performance of the conventional media is retained.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
3
Citations
NaN
KQI