Linearization of a Directional Modulation Transmitter Using Low-Complexity Cascaded Digital Predistortion
2019
Directional modulation (DM) implemented at the transmitter side is a physical layer security technology based on the multi-antenna structure. Current DM methods paid little attention to the issue of the nonlinear distortion of power amplifiers (PAs), which may lead to poor amplifier efficiency and worsen the signal's error vector magnitude (EVM). For the first time, we consider linearization of a DM transmitter using the digital predistortion (DPD) technique. We modify the paralleled DM DPD model to a novel cascaded model based on the characteristics of the DM transmitter. This modified method applies a common DPD to mitigate the nonlinear distortion of all paths and an auxiliary DPD to fine-tune each path, so as to significantly reduce the complexity. In order to validate this idea, two-element uniform linear array (ULA) and four-element ULA experiments were performed, in which 16QAM 20-MHz bandwidth signals with a peak-to-average power ratio (PAPR) of about 8.0 dB were generated for commercial part PAs. Experimental results show that the modified approach has almost the same linearization performance as the paralleled DM DPD technique but reduces the computational complexity significantly.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
33
References
3
Citations
NaN
KQI