The use of refractory metal and electron-beam sintering to reduce contact resistance for VLSI
1983
Low contact resistance for metal on silicon is particularly important for VLSI where contact dimensions become ≤1 µm. This paper reports on e-beam sintering of refractory metal contacts on implanted n + - and p + -silicon layers. With this technique, we have obtained contact resistivities as low as 1.5 × 10 -7 Ω. cm 2 and 1.2 × 10 -7 Ω . cm 2 for n + and p + contacts, respectively. These values are the lowest contact resistivities which have been achieved experimentally to date. We found no measurable metal-silicon interdiffusion when e-beam sintering was used. Electron-beam-induced MOS damage, including neutral traps, can be removed by a forming gas anneal.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
12
References
13
Citations
NaN
KQI