Porous chitosan/hydroxyapatite composite membrane for dyes static and dynamic removal from aqueous solution

Abstract The unique characteristics of Chitosan (CS) such as resource abundance, good biocompatibility, film-forming ability and sufficient sites ( NH 2 and OH) for adsorption of heavy metals or organic pollutants make CS-based membranes a promising membrane adsorbent. In this work, a porous Chitosan/Hydroxyapatite (CS/HA) membrane with a sponge-like surface and a three-dimensional interpenetrated porous structure of about mean pore size less than 10 μm was developed. The most striking advantage of the proposed membrane lies on the integration of appreciably high adsorption capacity (as compared with current CS-based membranes, also 2.5 times and 4 times higher than that of non-porous CS/HA membrane and the commercially available activate carbon) and the high-speed dynamic dye removal (98% or even better in less than 15 min). Besides, the synthesis protocol for the proposed membrane is also much simpler, environmental-friendly and economical. Moreover, the proposed membrane also featured repeated dye removal (above 80% after 5 cycles of dynamic adsorption at dye concentration of 150 mg L −1 ). All the above advantages indicated the intriguing potential of the porous membrane in practical wastewater treatment.