High-precision and wide-wavelength range FBG demodulation method based on spectrum correction and data fusion.

Optical fiber sensing technology plays an important role in the application of the sensing layer of the Internet of Things. The core of this technology is the demodulation of the fiber Bragg grating (FBG) sensing system. Since the FBG sensor utilizes the wavelength change to respond to the measured size, it is of great significance to improve the accuracy of the FBG wavelength demodulation. However, the demodulation performance of the current FBG wavelength demodulation method still has much room for improvement in terms of accuracy and stability. To this end, we propose a composite gas cell demodulation scheme based on spectrum correction and data fusion by using differential photodetectors, fitting extrapolation, data fusion methods, etc. The issue of low demodulation accuracy arising due to noise, temperature drift, spectral distortion, etc., was addressed to improve the demodulation performance of the FBG. In the experiment, four FBGs with different center wavelengths were used to verify their demodulation accuracy in the range of 1510–1590 nm. The maximum repeatability error of the FBG wavelength was measured to be 2.51 pm, and the linearity was as high as 99.9% or more; under the working environment of −20 °C to 60 °C, the maximum full-scale error did not exceed ±1.71 pm, which is improved by 54.3% compared with the traditional method.