Bus bar plate-shaped conductor and the bus bar made of it
2013
Excellent conductivity and strength, and bending workability is also excellent bus bar plate-like conductor as well as a bus bar made of such a conductor. The bus bar plate conductor, Fe: 0.05 to 2.0 wt%, Si: 0.05 to 0.6 wt% and Cu: 0.01 to 0.35 and containing mass%, the balance being Al and an Al alloy consisting of unavoidable impurities was obtained by hot rolling, and plate thickness (T) is an Al alloy plate 0.5~12Mm,. 55 to the conductivity of the remains of the rolling at room temperature 60% IACS, a tensile strength of at least 170 MPa, yield strength is at least 155 MPa, and with the thickness (T) cracks by the 90 ° bend and the inner bending radius has a characteristic that does not occur, at a temperature of 140 to 160 ° C. after heat treatment by holding time within 1000 hours, conductivity 55 to 60% IACS in room temperature, a tensile strength of more than 160 MPa, yield strength is configured to have a characteristic is not less than 145 MPa.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI