Reproducible resistive switching behavior in sputtered CeO2 polycrystalline films

Abstract Sputter-deposited CeO 2 film in the metal–insulator–metal structure exhibits repeatable resistive switching behavior under voltage sweep. Based on the X-ray diffraction patterns and the cross-sectional scanning electron microscope image, the CeO 2 film is polycrystalline with columnar grains perpendicular to the bottom electrode. Moreover, due to the symmetric device structure of Pt/CeO 2 /Pt, the resistive switching behavior is independent of bias polarity so that both positive and negative voltages can switch the device from high conducting state (ON-state) into low conducting state (OFF-state) and then back to ON-state, which is named non-polar resistive switching. The resistance ratio between two memory states is about five orders of magnitude, which is stable over 10 4  s at 0.3 V stress. In addition, the resistance ratio decreases with increasing the current compliance during forming process. The stability of ON-state, OFF-state, and as-deposited film state (the state before performing forming process) against temperature is also investigated in this study, showing that the OFF-state is less stable.