Domain reconstructions of g.o. SiFe during rotational magnetization considering also 3-D flux components

Domain analyses of modern types of grain-oriented (GO) transformer steel are rare, and they are focussed on single grains under academic magnetization patterns. The present Kerr effect study reveals that grains of industrial, polycrystalline materials react in specific ways according to individual crystallographic orientations. The amount of parameters is very large, especially if additional flux components are given as a further impact. The paper reports a procedure for statistical evaluations of quasi-dynamic Kerr effect images. The instantaneous area ratios of bar domain portion BD, oblique domain portion OD and saturation S are determined with consideration of peak induction BRD in the rolling direction (RD), axis ratio a of rotational magnetization, the angle ψ between B and RD, additional flux Bx in RD or Bz in normal direction. Focus is put on OD(t) which is assumed to be ak ey function forλ(t), i.e. the course of time of magnetostriction. As the most distinct tendencies, OD increases strongly with increases of a and ψ. OD(t) shows non-sinusoidal course of time with differences of the two halves of cycle. Rotation out of the RD yields sharp onsets of ODs, especially after half-cycle saturation. Additional off-plane flux enhances ODs in a general way.