Structural evolution of an alkali sulfate activated slag cement

Abstract In this study, the effect of sodium sulfate content and curing duration (from fresh paste up to 18 months) on the binder structure of sodium sulfate activated slag cements was evaluated. Isothermal calorimetry results showed an induction period spanning the first three days after mixing, followed by an acceleration-deceleration peak corresponding to the formation of bulk reaction products. Ettringite, a calcium aluminium silicate hydrate (C-A-S-H) phase, and a hydrotalcite-like Mg–Al layered double hydroxide have been identified as the main reaction products, independent of the Na 2 SO 4 dose. No changes in the phase assemblage were detected in the samples with curing from 1 month up to 18 months, indicating a stable binder structure. The most significant changes upon curing at advanced ages observed were growth of the AFt phase and an increase in silicate chain length in the C-A-S-H, resulting in higher strength.