Optimization of segmented alignment marks for advanced semiconductor fabrication processes
2001
The continued downscaling of semiconductor fabrication ground rule has imposed increasingly tighter overlay tolerances, which becomes very challenging at the 100 nm lithographic node. Such tight tolerances will require very high performance in alignment. Past experiences indicate that good alignment depends largely on alignment signal quality, which, however, can be strongly affected by chip design and various fabrication processes. Under some extreme circumstances, they can even be reduced to the non- usable limit. Therefore, a systematic understanding of alignment marks and a method to predict alignment performance based on mark design are necessary. Motivated by this, we have performed a detailed study of bright field segmented alignment marks that are used in current state-of- the-art fabrication processes. We find that alignment marks at different lithographic levels can be organized into four basic categories: trench mark, metal mark, damascene mark, and combo mark. The basic principles of these four types of marks turn out to be so similar that they can be characterized within the theoretical framework of a simple model based on optical gratings. An analytic expression has been developed for such model and it has been tested using computer simulation with the rigorous time-domain finite- difference (TD-FD) algorithm TEMPEST. Consistent results have been obtained; indicating that mark signal can be significantly improved through the optimization of mark lateral dimensions, such as segment pitch and segment width. We have also compared simulation studies against experimental data for alignment marks at one typical lithographic level and a good agreement is found.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
2
References
0
Citations
NaN
KQI