BEOL compatible WS2 transistors fully fabricated in a 300 mm pilot line

For the first time, WS2-based transistors have been successfully integrated in a 300 mm pilot line using production tools. The 2D material was deposited using either area selective chemical vapor deposition (CVD) or Atomic Layer Deposition (ALD). No material transfer was required. The major integration challenges are the limited adhesion and the fragility of the few-monolayer 2D material. These issues are avoided by using a sacrificial Al 2 O 3 capping layer and by encapsulating the edges of the 2D material during wet processing. The WS2 channel is contacted with Ti/TiN side contacts and an industry-standard back end of line (BEOL) flow. This novel low-temperature flow is promising for integration of back-gated 2D transistors in the BEOL.