EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics ENERGY EXTRACTION RESISTORS FOR THE MAIN DIPOLE AND QUADRUPOLE CIRCUITS OF THE LHC

When the LHC will be operating at its maximum beam energy, its superconducting dipole chains store a total magnetic energy of more than 11 GJ. At the same time, the QF and QD quadrupole circuits store a total energy of 400 MJ. Even with the sectorisation of each of the three principal power circuits into eight individually powered segments, the stored energy of a single circuit is considerable. During normal operation the energy in the dipole circuits is safely returned to the mains grid, using the thyristor-based, 'booster' unit of the power converters, operating in inversion. For the quadrupole chains, where the converter is of a mono-polar topology, the stored energy is dissipated into the resistive part of the warm d.c. power lines (busbars and cables) in a slow, controlled run-down. When a magnet quenches, however, such a slow energy transfer, taking 20 minutes from the rated LHC current, will not be possible. The 'cold' diode, taking over the magnet current in case of a quench, will not survive this slow current decay. For this reason, energy extraction facilities will be inserted into the power circuits. These systems are being designed to absorb the total circuit energy and de-excite the chains with a current decay time constant of 104 s for the dipoles and 40 s for the quadrupoles. The resulting maximum decay rates (-125 A/s and -325 A/s respectively) are comfortably below the levels where quench-back will occur. The energy extraction systems are based on an array of special, mechanical d.c. circuit breakers and absorber resistors, which are switched into the circuit by opening of the breakers. The design and construction of these large power resistors of a unique concept are the topics of this paper. The project is being realised as collaboration between, IHEP-Protvino, CERN and European Industry.