Dielectric material options for integrated capacitors

2014 
Future MIM capacitor generations will require significantly increased specific capacitances by utilization of high-k dielectric materials. In order to achieve high capacitance per chip area, these dielectrics have to be deposited in three-dimensional capacitor structures by ALD or AVD (atomic vapor deposition) process techniques. In this study eight dielectric materials, which can be deposited by these techniques and exhibit the potential to reach k-values of over 50 were identified, prepared and characterized as single films and stacked film systems. To primarily focus on a material comparison, preliminary processes were used for film deposition on planar test devices. Measuring leakage current density versus the dielectric constant k shows that at low voltages (≤1 V) dielectrics with k-values up to 100 satisfy the typical leakage current density specification of <10 −7 A/cm 2 for MIM
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    29
    References
    6
    Citations
    NaN
    KQI
    []