Magnetostriction of Fe-Ti Alloys
2010
Longitudinal and transverse magnetostriction measurements were performed on polycrystalline Fe 100- x Ti x alloys, for a large Ti concentration range, from x = 8.8 to 34.7 at.%. Our results showed that substituting Fe by Ti does not significantly enhance the magnetostriction. For all Ti concentrations in the magnetically saturated state, the longitudinal magnetostriction values vary from -2 ×10 -6 to 6 × 10 -6 . On the other hand, Fe 100-x Ti x alloys exhibit a large forced volume magnetostriction, which increases with increasing Ti-concentration. The magnetostriction behavior could be explained considering investigations of the hyteresis loops and the microstructure .
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
7
References
3
Citations
NaN
KQI