Лемешный плуг с дополнительными дисковыми рабочими органами

The article is devoted to main processing of soil with the combined ploughshare plow. We have made a review of the existing patents of this technological operation in this article. The article presents most important results of modeling of new types of constructions, problems of traction resistance and quality of preparation of soil for sowing. The article has the investigation character that was provided by the analysis of ways and means of mechanization for main soil processing with the furrow inversion and excerpts from works of the leading scientists on the studied subject, there were cited the types of patents which provide the optimal soil processing, there were indicated their disadvantages and ways of decision of problems. There was determined the main tendency of working outs of soil-processing combined machines, the advancing of constructions of tilling aggregates to improve the qualitative indexes of their work. Also there was substantiated the form of disk, namely there was specified the causalinvestigative communication of existence of cuts in a disk of the soil-cultivating tool in comparison with a continuous disk. There was described the principle and the process of work of operated combined ploughshare plow. In the result of the work there was obtained the construction of ploughshare plow with additional working bodies which consist of disks of set batteries for every panel of ploughshare plow. In conclusions there were observed the main results reached at present time