Low Cost Paper-based LC Wireless Humidity Sensors and Distance-Insensitive Readout System

Wireless, passive, and cost-efficient monitoring of moisture within packaged food and medicine is important to ensure their safety and freshness. This paper presents paper-based single spiral inductance-capacitance (LC) sensors and a distance-insensitive readout system. The parasitic capacitance of the single-spiral coil is used to form an LC resonant circuit with its inductance. The printing paper is utilized as a humidity sensing material. A model for the LC sensor is analyzed and compared with HFSS simulation, showing the relative error within 6.3%. Nano-silver paste for the single-spiral coil was screen printed on the printing paper. The LC sensors with 4, 6, and 8-turns coils were characterized at relative humidity levels of 15%-90%RH by a readout coil at a fixed position. Comparison shows that the 8-turn sensor has the best linearity with respect to humidity. The sensitivity and response time were measured to be 120 kHz/%RH and 60 minutes, respectively, with the hysteresis errors less than 0.9%. During the practical monitoring, the tested signal frequency will have a shift if the coil's relative position alters. To weaken the influence of the coil's position, a readout coil, working at the quasi-resonant with the LC sensor was utilized to enhance the readout, resulting in more stable signal. According to the experimental results, the improved readout system can restrain the frequency shift within 1.1% at a readout distance from 2-50 mm when the ambient humidity is 60%RH.