A REVIEW ON ORGANIC REMOVAL OF MUNICIPAL AND INDUSTRIAL WASTEWATER USING UP-FLOW ANAEROBIC SLUDGE BLANKET (UASB) AND ITS APPLICATION IN ANAMMOX PROCESS
1
Citation
73
Reference
10
Related Paper
Citation Trend
Abstract:
Anaerobic treatment processes are widely recognized as a sustainable wastewater management system for their encouraging results in treating highly concentrated wastewater (bCOD > 4000 mg/L) with low energy requirement, which is more economical than aerobic processes. High rate anaerobic reactors, particularly up-flow anaerobic sludge blanket (UASB) reactors, have been extensively employed worldwide due to their high volumetric organic capacity and less sludge yield. However, some limiting factors need to be resolved for large-scale applications. This review aims to emphasize the organic removal of municipal and industrial wastewater using UASB technology and its application in the anammox process in treating ammonia-rich wastewater.Keywords: Anaerobic, anammox, granulation, Up-flow Anaerobic Sludge Blanket (UASB)Keywords:
Anammox
Industrial wastewater treatment
Industrial wastewater treatment
Linear alkylbenzene
Cite
Citations (48)
This essay provides an overview of bioreactor membrane (MBR) technology and its recent applications in industrial sewage treatment in wastewater treatment plants (WWTP). It begins with an introduction that outlines the importance of industrial sewage treatment and the paper's purpose. It then provides an overview of industrial sewage treatment in WWTP, the current challenges faced in this area, and the need for advanced wastewater treatment technologies. The essay discusses MBR technology, its features and advantages, and how it works in WWTP of industrial wastewater. Next, their benefits and challenges are presented with the recent application of MBR technology in industrial sewage treatment in Shanghai Jinshanwei WWTP. The essay concludes with a summary of the key points discussed, the potential future of MBR technology in industrial sewage treatment, and recommendations for further research and development of MBR technology in this field. Overall, it highlights the importance of MBR treatment methods in addressing the challenges of industrial sewage treatment and emphasizes the need for continued innovation and research in this area.
Membrane bioreactor
Industrial wastewater treatment
Cite
Citations (0)
Fluorescent In Situ Hybridisation (FISH) was used to monitor the presence of filamentous microorganisms in industrial wastewater treatment plants (WWTPs). Monitoring with a restricted set of FISH probes in WWTPs from potato industry showed growth and decline of Thiothrix populations that could be linked to operational procedures. In a follow up project new FISH probes were developed for filamentous bacteria in industrial WWTPs and 70 WWTPs were analysed for presence of these filaments. Several newly described species of filamentous bacteria appear to be common and dominant in industrial WWTPs. Monitoring of a WWTP from textile industry showed growth and decline of one of these organisms when operational conditions in the plant were varied. The present paper demonstrates that bulking sludge in industrial wastewater treatment plants can effectively be monitored using a combination of standard chemical analyses and the FISH technique.
Industrial wastewater treatment
Segmented filamentous bacteria
Cite
Citations (37)
Fusion power
Breeder (animal)
Conceptual design
Cite
Citations (40)
As part of the ongoing China Fusion Engineering Test Reactor (CFETR) studies, this work focused on the study of the electromagnetic (EM) loads distribution on inboard (IB) and outboard (OB) blanket vertical segments. In this paper, a major central disruption scenario with a 36-ms linear current quench was performed in the ANSYS finite element software. EM forces and moments, both on the single module and the complete blanket segment, were calculated for the updated helium-cooled ceramic breeder (HCCB) blanket. Furthermore, the effect of EM loads with respect to poloidal segmentations on the back plate (BP) was studied. Results show that the EM forces and moments in the IB blanket barely changed, but in the OB blanket, great changes occurred. With poloidal segmentations increasing, EM forces loads on the BP will be reduced. This paper may provide important data to support subsequent optimization of the BP of CFETR and could also be a technical reference for other fusion organizations.
Breeder (animal)
Fusion power
Cite
Citations (4)
Anammox
Cite
Citations (16)
AbstrcatFusion blanket conceptual schemes emerge in endlessly. It is necessary that the existing blanket schemes should be surveyed and compared, further, that some rules in them should be extracted for us to advance a more reasonable and feasible innovative scheme. Also, it is indispensable that blanket should be classified and denominated, especially in programming for the intelligentized design of blanket. A method of blanket classification and blanket count and blanket nomenclature is put forward, by which blanket structural feature types are extracted and encoded according to possible used materials in blanket and their states in working. It is most important that a batch of innovative fusion blanket schemes can be discovered by this method.
Feature (linguistics)
Cite
Citations (0)
Component (thermodynamics)
Cite
Citations (4)
The application of the anaerobic ammonium oxidation (anammox) reaction in a biological nitrogen removal system to treat wastewater has become of great interest since its discovery. The anammox reaction is performed by anammox bacteria that belong to the Planctomycete phylum. The reaction occurs in the presence of ammonium using nitrite as the substrate under anaerobic conditions. However, the bacteria have an extremely slow growth rate and stringent metabolic conditions that cause difficulty in culturing and applying the system for wastewater treatment. Anammox enrichment has a long start-up period for the anammox process that hinders researchers using laboratory and full-scale systems for the first time. Many attempts have been made to culture anammox to establish a successful anammox culture with a shorter start-up period for the anammox reaction and high nitrogen removal activity. This paper reviews previous studies on anammox enrichment with emphasis on (i) inoculum selection, (ii) enrichment techniques and (iii) factors influencing anammox enrichment. This review will assist researchers in planning and designing an appropriate anammox enrichment. The findings should widen the application of anammox in biological nitrogen removal systems for nitrogenous wastewater.
Anammox
Cite
Citations (93)
Bio-process modelling is increasingly used in design, modification and troubleshooting of wastewater treatment plants (WWTPs). Characterisation of the influent wastewater to a WWTP is an important part of developing such a model. The characterisation required for modelling is more detailed than that routinely employed for monitoring WWTP operation. Wastewater characteristics depend on the sources within the catchment served by a particular WWTP, and the presence of industrial effluents can cause the wastewater to be significantly different from purely domestic effluent. eThekwini's wastewater treatment system is one of those most affected by industrial effluents in South Africa. Where industrial pollutants cause particular problems, additional measurements, beyond those standardly applied in sewage treatment, are required. Since influent characteristics vary from one catchment to another, this paper presents and compares results of influent wastewater characterisation from three municipal WWTPs, two of which are operated by eThekwini Water Services, which receive a combination of industrial and domestic wastewater. The paper also presents efforts to fractionate the influent COD of another WWTP run by eThekwini municipality and receiving a complex mixture of industrial and domestic effluent. The influent characterisation involves the determination of the volumes and concentrations of the carbonaceous, nitrogenous and phosphorus fractions in the wastewater, as well as other constituents present in the wastewater. This paper focuses on the carbonaceous fraction in the wastewater.Keywords: influent characterisation, industrial effluent, process modelling
Industrial wastewater treatment
Cite
Citations (16)