Technical Reviews of Power Loss Optimization in High-Frequency PSiPs—In Relation to Power Switches and Power Inductors
2
Citation
53
Reference
10
Related Paper
Citation Trend
Abstract:
Power losses of switches and inductors are consistent challenges that hinder the development of high-frequency power supply in package (PSiP). This paper investigates the roadmap for power loss optimizations of switches and inductors in high-frequency PSiPs. Firstly, a size and parallel quantity design method to reduce power loss in an integrated Si LDMOSFET is provided with comprehensive consideration of switching frequency and power levels. Secondly, quality factors of different air-core inductors are analyzed with consideration of geometric parameters and skin effect, which provides the winding structure optimization to reduce power losses. The power losses of the integrated Si LDMOSFET and air-core inductors are both reduced to less than 10% of the output power at 1~100 MHz switching frequency and 0.1~10 W power level. Finally, based on the above optimizations, power losses of switches and inductors are calculated with switching frequency and power level. Combining the calculated results, this paper predicts the efficiency boundaries of PSiPs. Upon efficiency normalization with consideration of input and output voltage levels, all the predictions are consistent with the published literature. The efficiency predication error is 1~15% at 1~100 MHz switching frequency and 0.1~10 W power level. The above power loss optimizations improve the efficiency, which provides potential roadmaps for achieving high-frequency PSiPs.Keywords:
Ferrite core
Switching frequency
Design of air-core inductors is not widely known. The major advantage of an air-core inductor is that it is free from iron loss and hence offers better performance than ferrite cores. This paper discusses design details of high frequency air-core inductor used in a dual active bridge (DAB) DC-DC converter for aerospace applications. The paper will serve as a useful aid for early stage researchers to design air-core inductors in a simple and effective manner. An air-core inductor was designed to test the high current devices of the DAB DC-DC converter, and another was used in the AC link of the DAB converter. Experimental results for 125V, 300A, 20 kHz operation of DAB high current devices tested with an air-core inductor of 4.17μH are provided.
Ferrite core
Switching frequency
Cite
Citations (9)
This paper presents a method to predict the real operation current wave-shape of Ferrite Core (FC) inductors in switching power supply applications involving a moderate inductor saturation. The method is based on a behavioral analytical model of inductance versus current saturation curve, obtained starting from the data provided by inductors manufacturers. The algorithm developed to solve the nonlinear model of the inductor can be applied to predict the range of the operating conditions involving a sustainable partial saturation for FC inductors, and the resulting method is best suited for the selection of minimum size inductors for high-power-density power supply design solutions.
Ferrite core
Saturation (graph theory)
Cite
Citations (100)
In this work, we analyze the impact of the permittivity of the material of the core and of the configuration of the winding on the parasitic capacitance that typically undermines the performance of ring-core inductors at high frequencies. Inductors with NiZn and MnZn ferrite cores and with both loose and tight windings have been constructed, measured and compared. Also, a high-frequency circuit model of the inductors has been employed along with a simple characterization technique to obtain equivalent circuits of the ring-core inductors. This has allowed us to quantify the impact of the different core choices and winding strategies on the performance of the inductors up to frequencies of at least 30 MHz. Our results demonstrate that the parasitic capacitance of single-layer ring core inductors can be reduced by using winding strategies that are different for NiZn and MnZn cores. We conclude that the different responses of inductors made with different core materials is due to the differences in the permittivity of the ferrite materials of the core.
Ferrite core
Parasitic capacitance
Cite
Citations (0)
A model of ferrite core inductors is presented. The skin and proximity effects which increase the ac resistance of the inductor winding are considered. The core losses are studied. Power losses of the inductor are modeled by means of a frequency dependent series resistance. Parasitic capacitances which affect the inductor high-frequency operation are also considered. The model is applicable to cores with and without an air gap. Calculated and measured inductor parameters such as equivalent series inductance (ESL), reactance, equivalent series resistance (ESR), impedance magnitude and phase, and quality factor are plotted as functions of the operating frequency and compared. Calculated results were in good agreement with the measured ones up to the inductor self-resonant frequency. As a consequence, the discussed model is suitable to represent the frequency response of ferrite core inductors and can be effectively used for designing inductors.< >
Ferrite core
Equivalent series resistance
Equivalent series inductance
Reactance
Equivalent impedance transforms
Q factor
Cite
Citations (40)
This paper sets down the major considerations in the design of high frequency AC inductors. It describes two methods for designing the inductor— the area product method and the core geometry method. The two major effects of the inductor air gap, fringing flux power loss and increase of inductance, are discussed. Equations for the inductor design and a step-by-step design procedure are given. The use of a lumped air gap or a distributed air gap are discussed and a comparison of the losses resulting from these gaps together with experimental results are presented.
Ferrite core
Air gap (plumbing)
Cite
Citations (4)
This paper presents SMD inductors composed of soft-magnetic metal powder compacts based on newly developed materials and processes. High saturation magnetization of the core materials results in high DC-Bias characteristics and downsizing inductors, which can never be achieved by conventional ferrite core inductors. These SMD inductors can realize high efficiency in a circuit due to low loss characteristics in comparison with metal composite type inductors as well as ferrite inductors.
Ferrite core
Saturation (graph theory)
Cite
Citations (8)
This research project develops two algorithms to automate the design process of coupled inductors using E-type ferrite and Kool mμ cores for power electronics applications. The algorithms consider core data from datasheets and determine the necessary parameters for designing coupled inductors. Testing of constructed inductors validates their performance at 50 kHz. The study demonstrates that the algorithms effectively design coupled inductors and pave the way for broader applications of these components in power electronics systems.
Ferrite core
Power Electronics
Cite
Citations (0)
This paper discusses a normalized inductance modeling approach for Ferrite Power Inductors (FPIs), aimed at facilitating the analysis of inductors performances and their selection in Switch-Mode Power Supply (SMPS) design. A normalized temperature-independent inductance versus current curve is proposed, to describe the saturation behavior of an entire family of inductors with different nominal inductances, made of different winding turns on the same magnetic core. A Normalized Operating Area (NOA) of the inductor family is consequently derived, allowing a quick identification of the normalized ranges of average inductor current and volt-second integral associated to the desired levels of a given performance of interest (e.g., the peak-to-peak inductor current ripple). By means of the NOA, it is possible to obtain the Real Operating Area (ROA) of each inductor, without performing additional simulations. Examples of application of the proposed modeling approach are provided for two FPI families, with shielded and unshielded magnetic cores of different ferrite materials.
Ferrite core
Equivalent series inductance
Cite
Citations (4)
Inductors for filtering devices are widely employed in power electronics applications in order to reduce voltage and current harmonics caused by switching converters. The use of ferrite-core inductors is limited to small power applications, whereas air-core and laminated iron-core inductors are employed in the medium-to-high power range. The choice of the core medium strongly affects the behavior of the inductor versus frequency. In particular, the inductance, the self-resonant frequency, the winding and core losses and the stray magnetic field are quite different for air-core and laminated iron-core inductors. In this paper a comparison between these two kinds of inductors is carried out through an analytical approach and experimental validations.
Cite
Citations (8)
Procedures for ferrite-core and Molypermalloy-core inductors detailed. Report presents design procedures for two types of highfrequency inductors: those with iron or ferrite cores and lumped airgaps and those with Molypermally powder cores and distributed airgaps.
Ferrite core
Cite
Citations (0)