Coupling Anion‐Capturer with Polymer Chains in Fireproof Gel Polymer Electrolyte Enables Dendrite‐Free Sodium Metal Batteries
Meng YangFan FengYufeng RenS. C. ChenFangfang ChenDongkun ChuJunhong GuoZhenhai ShiTongxiang CaiWenli ZhangZi‐Feng MaSuli ChenTianxi Liu
27
Citation
56
Reference
10
Related Paper
Citation Trend
Abstract:
Abstract Sodium metal batteries (SMBs) using gel polymer electrolytes (GPEs) with high theoretical capacity and low production cost are regarded as a promising candidate for high energy‐density batteries. However, the inherent flammability of GPEs and uncontrolled Na dendrite caused by inferior mechanical properties and interfacial stability hinder their practical applications. Herein, an anion‐trapping fireproof composite gel electrolyte (AT‐FCGE) is designed through a chemical grafting–coupling strategy, where functionalized boron nitride nanosheets (M‐BNNs) used as both nanosized crosslinker and anion capturer are coupled with poly(ethylene glycol)diacrylate in poly(vinylidene fluoride‐co‐hexafluoropropylene) matrix, to expedite Na + transport and suppress dendrite growth. Experimental and calculation studies suggest that the anion‐trapping effect of M‐BNNs with abundant Lewis‐acid sites can promote the dissociation of salts, thus remarkably improving the ionic conductivity and Na + transference number. Meanwhile, the formation of highly crosslinked semi‐interpenetrating network can effectively in situ encapsulate non‐flammable phosphate without sacrificing the mechanical properties. Consequently, the resulting AT‐FCGE shows significantly enhanced Na + conductivity, mechanical properties, and excellent interfacial stability. The AT‐FCGE enables a long‐cycle stability dendrite‐free Na/Na symmetric cell, and prominent electrochemical performance is demonstrated in solid‐state SMBs. The approach provides a broader promise for the great potential of fire‐retardant gel electrolytes in high‐performance SMBs and the beyond.A porous, homogeneous, phosphorous‐enriched oxide nanolayer was realized on the new Ti‐15Ta‐5Zr alloy surface by the anodic galvanostatic electrodeposition in phosphoric acid solution. This nanolayer contains TiO 2 , ZrO 2 oxides, tantalum suboxides, and ions incorporated in the time of the electrodeposition process and has a thickness of 15.5 nm (X‐ray photoelectron spectroscopy data). Atomic force microscopy determined a homogeneous roughness. Scanning electron microscopy evinced a porous microstructure that can stimulate the growth of the bone tissue into pores. The presence of the anions promotes the electrostatic bonds between the nanolayer and different species from the biofluid, namely, osteoinduction. The anodic oxidation nanolayer improved all electrochemical and corrosion parameters conferring superior protection to the substrate by its higher resistance to the ion migration. Impedance spectra showed that the electrodeposited nanolayer is formed by an inner, dense, barrier layer and an outer porous layer. The nanolayer thickened in time, namely, is bioactive. The oxidized nanolayer is able to protect the alloy from ion release, to assure long‐term corrosion resistance, to minimize adverse reactions, to increase alloy bioactivity, to stimulate cell growth, and to favor osseointegration.
Characterization
Cite
Citations (2)
Porous SiC Ceramics with Multiple Pore Structure Fabricated via Gelcasting and Solid State Sintering
Porous SiC ceramics with multiple pore structures were fabricated via gelcasting and solid state sintering.A novel gelling agent of Isobam was applied and PMMA was used as both foam stabilizer and pore forming agent.The mechanical properties of porous SiC ceramics were investigated as functions of PMMA content, rotating speed of ball mill, and sintering temperature.With PMMA content increasing from 5wt% to 20wt%, the foaming effect was inhibited while the stability of bubbles increased.When the rotating speed was 220 r/min, the open porosities of the as-prepared SiC ceramics sintered at 2100 varied ℃ from 51.5% to 72.8%, and compressive strength varied from 7.9 to 48.2 MPa.With the rotating speed increasing from 220 to 280 r/min, the foaming effect was aggravated and the porosities of SiC ceramics sintered at 2100 increased.℃ While the sintering temperature increasing from 2050 to 2150 , ℃ the SiC ceramics prepared with PMMA content of 20wt% at rotating speed of 220 r/min decreased in the open porosities while increased in compressive strength.
Cite
Citations (0)
Nichrome
Cite
Citations (0)
The changes in the microstructure and improvement in the mechanical properties of as‐cast AlSi7MgCu0.5 alloy induced by the heat treatment and technique of equal channel angular pressing (ECAP) were investigated. The heat treatment of as‐cast alloy performed before the ECAP technique was required to increase the plasticity of the alloy. Therefore, the samples of analysed alloys were solution annealed at optimized temperature of 823 K for 4 hours to dissolve the particles of intermetallic π (Al 8 FeMg 3 Si 6 ) phase and to spheroidize the Si particles. Subsequently, water quenching and artificial ageing at optimized temperature of 573 K for 5 hours was used to obtain an overaged alloy state. The microstructure of alloy was consisted of α (Al) solid solution, eutectic Si particles, and intermetallic β (Mg 2 Si), Q‐Al 4 Mg 5 Si 4 Cu, α ‐Al 12 (Fe,Mn) 3 Si, and/or α ‐Al 15 (Fe,Mn) 3 Si 2 phase particles. The crystal structure of present phases was confirmed by hard X‐ray diffraction at Deutsches Elektronen‐Synchrotron (DESY) in Hamburg and by the selected area electron diffraction (SAED) performed inside the transmission electron microscope (TEM). The heat‐treated alloy was processed by ECAP at room temperature following route A. Repetitive ECAP of alloy homogenized the heterogeneous as‐cast microstructure and formed the ultrafine subgrain microstructure with elongated subgrains of 0.2 µ m in width and 0.65 µ m in length and the high dislocation density. Microstructural changes in alloy induced by both heat treatment and ECAP led to the high strain hardening of the alloy that appeared in an improvement in strength, ductility, and microhardness of alloy in comparison with as‐cast alloy state.
Cite
Citations (4)
Cite
Citations (11)
In the pursuit of ever more energy-dense and longer lasting Li-ion batteries, the electrolyte is still an area of intense research. A good choice of electrolyte can make or break the long-term performance of a cell. This paper highlights various advances in electrolyte development and evaluation that have been made in the last several years. Blends of electrolyte additives that give superior capacity retention over several thousand cycles, as well as new formulations of electrolyte solvents to achieve higher charging rates and higher voltage operation are presented. The Advanced Electrolyte Model, a theoretical model for the calculation of electrolyte properties, is presented as an effective way to determine the transport properties of a diverse array of electrolyte systems thus speeding electrolyte development.
Cite
Citations (14)
Бұл зерттеужұмысындaКaно моделітурaлы жәнеоғaн қaтыстытолықмәліметберілгенжәнеуниверситетстуденттерінебaғыттaлғaн қолдaнбaлы (кейстік)зерттеужүргізілген.АхметЯссaуи университетініңстуденттеріүшін Кaно моделіқолдaнылғaн, олaрдың жоғaры білімберусaпaсынa қоятынмaңыздытaлaптaры, яғнисaпaлық қaжеттіліктері,олaрдың мaңыздылығытурaлы жәнесaпaлық қaжеттіліктерінеқaтыстыөз университетінқaлaй бaғaлaйтындығытурaлы сұрaқтaр қойылғaн. Осы зерттеудіңмaқсaты АхметЯсaуи университетіндетуризмменеджментіжәнеқaржы бaкaлaвриaт бaғдaрлaмaлaрыныңсaпaсынa қaтыстыстуденттердіңқaжеттіліктерінaнықтaу, студенттердіңқaнaғaттaну, қaнaғaттaнбaу дәрежелерінбелгілеу,білімберусaпaсын aнықтaу мен жетілдіружолдaрын тaлдaу болыптaбылaды. Осы мaқсaтқaжетуүшін, ең aлдыменКaно сaуaлнaмaсы түзіліп,116 студенткеқолдaнылдыжәнебілімберугежәнеоның сaпaсынa қaтыстыстуденттердіңтaлaптaры мен қaжеттіліктерітоптықжұмыстaрaрқылыaнықтaлды. Екіншіден,бұл aнықтaлғaн тaлaптaр мен қaжеттіліктерКaно бaғaлaу кестесіменжіктелді.Осылaйшa, сaпa тaлaптaры төрт сaнaтқa бөлінді:болуытиіс, бір өлшемді,тaртымдыжәнебейтaрaп.Соңындa,қaнaғaттaну мен қaнaғaттaнбaудың мәндеріесептелдіжәнестуденттердіңқaнaғaттaну мен қaнaғaттaнбaу деңгейлерінжоғaрылaту мен төмендетудеосытaлaптaр мен қaжеттіліктердіңрөліaйқын aнықтaлды.Түйінсөздер:сaпa, сaпaлық қaжеттіліктер,білімберусaпaсы, Кaно моделі.
Cite
Citations (0)
The nationally-recognized Susquehanna
Chorale will delight audiences of all
ages with a diverse mix of classic and
contemporary pieces. The ChoraleAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂA¢AÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂs
performances have been described
as AÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂA¢AÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂemotionally unfiltered, honest
music making, successful in their
aim to make the audience feel,
to be moved, to be part of the
performance - and all this while
working at an extremely high
musical level.AÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂA¢AÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂAÂA Experience choral
singing that will take you to new
heights!
Cite
Citations (0)
Nanocrystalline material
Cite
Citations (1)