Terpyridine-functionalized polyaniline/reduced graphene oxide composites for capturing Cr3+ ions and its application in supercapacitors
6
Citation
72
Reference
10
Related Paper
Citation Trend
Keywords:
Power density
Power density
Cite
Citations (40)
Electroceramics with high energy density are very crucial to meet the increasing demands of energy storage devices. Storage devices with high electrochemical performance are the need of the hour. Superior electrochemical performance has a direct tie with parameters, such as high storage density and power density. High-performance supercapacitors can be achieved by simply enhancing energy density. Many factors greatly influence the energy storage density of a supercapacitor. The energy density can easily be tailored by controlling two factors such as capacitance and voltage. The energy density is affected by parameters such as spore size, grain size, surface area, functional group, and band gap. The voltage can be increased by introducing asymmetric supercapacitors or hybrid supercapacitors. The future perspective of new methods to improve energy density is deliberated briefly.
Power density
Energy density
Cite
Citations (1)
Abstract Herein, NiCo 2 O 4 /C core‐shell nanoneedles grown on Ni foam are prepared by a simple route and applied in supercapacitors. Electrochemical results show that the area specific capacitance of NiCo 2 O 4 /C reaches 2057 mF/cm 2 at 1 mA/cm 2 , which is about 4 times than that of the pristine NiCo 2 O 4 . The electrode exhibits excellent rate capability (92 % of capacitance retention at 10 mA/cm 2 ) and remarkable cycling stability (81 % of capacitance retention after 10000 cycles). The as‐fabricated all‐solid‐state asymmetric supercapacitor (NiCo 2 O 4 /C//AC(active carbon)) achieves an energy density of 2 mW h cm −3 at a power density of 37 mW cm −3 and remains 1.6 mW h cm −3 at a power density of 120 mW cm −3 . Moreover, the ASC device can retain 87 % capacitance after 4000 cycles. The result reveals that it is a feasible method to achieve excellent performance in energy storage devices by the dipping method.
Power density
Energy density
Cite
Citations (9)
Cite
Citations (11)
Power density
Energy density
Cite
Citations (121)
This paper revisits the supercapacitor capacitance characterization method 1A of the IEC standard 62391-1. For comparison, an alternative method using the total charge stored in the supercapacitor is proposed. These two methods are applied to three supercapacitor samples with different rated capacitances from different manufacturers at different terminal voltages. Results show that the capacitance determined using the IEC method decreases when the discharge current increases. Besides, the capacitance measured using the IEC method is lower than that estimated using the total charge method. These observations are explained by analyzing a five-branch RC ladder circuit model capturing the porous electrode structure and the charge redistribution process of supercapacitors.
Differential capacitance
Cite
Citations (19)
Power density
Energy density
Cite
Citations (22)
Graphene is a promising material for energy storage, especially for high performance supercapacitors. For real time high power applications, it is critical to have high specific capacitance with fast charging time at high current density. Using a modified Hummer's method and tip sonication for graphene synthesis, here we show graphene-based supercapacitors with high stability and significantly-improved electrical double layer capacitance and energy density with fast charging and discharging time at a high current density, due to enhanced ionic electrolyte accessibility in deeper regions. The discharge capacitance and energy density values, 195 Fg-1 and 83.4 Whkg-1, are achieved at a current density of 2.5 Ag-1. The time required to discharge 64.18 Whkg-1 at 5 A/g is around 25 sec. At 7.5 Ag-1 current density, the cell can deliver a specific capacitance of about 137 Fg-1 and maintain 98 % of its initial value after 10,000 cycles, suggesting that the stable performance of supercapacitors at high current rates is suitable for fast charging-discharging applications. We attribute this superior performance to the highly porous nature of graphene prepared with minimum restacking due to crimple nature wrinkles and the improved current collecting method.
Power density
Cite
Citations (26)
Power density
Carbon fibers
Cite
Citations (19)
Here we proposed novel NiCo2O4 nanowires on carbon black layer that used as a superior electrode for supercapacitors, with an excellent pseudocapacitive performance. The NiCo2O4 nanowires-based electrode provide high values of specific capacitance of 3.31 F/cm2 corresponding to the current densities of 5 mA/cm2. The symmetrical supercapacitor based on NiCo2O4 nanowires-based electrode have a high areal specific capacitance of 42.6 mF/cm2 corresponding to the current densities of 0.5 mA/cm2. It exhibited good cycling life that the specific capacitance maintained with no decrease during 50000 cycles. Our work can be applied in mass applications of high-capacitance energy-storage supercapacitors.
Carbon fibers
Cite
Citations (1)