logo
    Chapter 1 The Selection of the Appropriate Detector
    0
    Citation
    1
    Reference
    10
    Related Paper
    V-detector algorithm is unable to guarantee a large coverage for generated detector.The shortcoming usually results in a large number of detectors in the detector sets and low detection efficiency.An optimized V-detector algorithm was proposed.In the optimized algorithm,a detector was generated on the basis of a randomly chosen uncovered non-self sample,and the detector generation process ensured the detector covered the non-self sample and extended the detector's coverage by determining the detector's center and detection radius reasonably.Meanwhile,hypothesis testing process was used to estimate the coverage of a detector set,and hypothesis testing process was integrated with detector generation process to ensure the generated detector set fully covered the non-self region,and reduced the number of detectors in the detector set.Experimental results indicate that compared with the V-detector algorithm,the optimized algorithm generates a much smaller detector set and increases the detection efficiency.
    Sample (material)
    Citations (1)
    A simple, rapid method for the determination of the benzodiazepines, diazepam and chlordiazepoxide, and their metabolites by high performance liquid chromatography (HPLC) has been developed. The procedure is applicable to the assay of other similar drugs in biological fluids. The method utilizes BondElut™ extraction columns to facilitate the extraction. BondElut columns selectively adsorb the benzodiazepines and metabolites from serum at a pH of 9.0. The compounds are eluted with 300μl of methanol which makes sample concentration rapid, if even necessary. Analysis is performed using isocratic reversed-phase chromatography, and quantitation is carried out by ultraviolet (UV) detection. Using this procedure, it is possible to determine drug and metabolite levels to as low as 25 ng/ml in 0.5 ml of serum.
    Sample Preparation
    Chlordiazepoxide
    Solid phase extraction
    Oxazepam
    Citations (45)
    A new type of three-dimensional (3D) detector, namely 3D-Open-Shell-Electrode Detector (3DOSED), is proposed in this study. In a 3DOSED, the trench electrode can be etched all the way through the detector thickness, totally eliminating the low electric field region existed in the conventional 3D-Trench-Electrode detector. Full 3D technology computer-aided design (TCAD) simulations have been done on this novel silicon detector structure. Through comparing of the simulation results of the detector, we can obtain the best design of the 3SOSED. In addition, simulation results show that, as compared to the conventional 3D detector, the proposed 3DOSED can improve not only detector charge collection efficiency but also its radiation hardness with regard to solving the trapping problem in the detector bulk. What is more, it has been shown that detector full depletion voltage is also slightly reduced, which can improve the utility aspects of the detector. When compared to the conventional 3D detector, we find that the proposed novel 3DOSED structure has better electric potential and electric field distributions, and better electrical properties such as detector full depletion voltage. In 3DOSED array, each pixel cell is isolated from each other by highly doped trenches, but also electrically and physically connected with each other through the remaining silicon bulk between broken electrodes.
    Particle detector
    Radiation hardening
    Citations (6)
    Spectrum analyzer is one of the radio frequency measuring instruments in common use.Appropriate detector types should be chosen to analyze and measure a variety of signals to show their characteristics correctly,the results would be inaccurate or absolutely wrong when inappropriate detector types are chosen.Various kinds of detector types of spectrum analyzer are introduced,the features and applications of sample detector,max peak detector,min peak detector,auto peak detector,normal detector,average detector,RMS detector and quasi-peak detector are analyzed in detail,the differences among them are concluded.
    Citations (0)