Impact of Donor–Acceptor Interaction and Solvent Additive on the Vertical Composition Distribution of Bulk Heterojunction Polymer Solar Cells
Qingduan LiLiming WangShengjian LiuXiaozhi ZhanZhu TaoZhixiong CaoHaojie LaiJiaji ZhaoYue‐Peng CaiWeiguang XieFei Huang
51
Citation
59
Reference
10
Related Paper
Citation Trend
Abstract:
The vertical composition distribution of a bulk heterojunction (BHJ) photoactive layer is known to have dramatic effects on photovoltaic performance in polymer solar cells. However, the vertical composition distribution evolution rules of BHJ films are still elusive. In this contribution, three BHJ film systems, composed of polymer donor PBDB-T, and three different classes of acceptor (fullerene acceptor PCBM, small-molecule acceptor ITIC, and polymer acceptor N2200) are systematically investigated using neutron reflectometry to examine how donor–acceptor interaction and solvent additive impact the vertical composition distribution. Our results show that those three BHJ films possess homogeneous vertical composition distributions across the bulk of the film, while very different composition accumulations near the top and bottom surface were observed, which could be attributed to different repulsion, miscibility, and phase separation between the donor and acceptor components as approved by the measurement of the donor–acceptor Flory–Huggins interaction parameter χ. Moreover, the solvent additive 1,8-diiodooctane (DIO) can induce more distinct vertical composition distribution especially in nonfullerene acceptor-based BHJ films. Thus, higher power conversion efficiencies were achieved in inverted solar cells because of facilitated charge transport in the active layer, improved carrier collection at electrodes, and suppressed charge recombination in BHJ solar cells.Keywords:
Acceptor
Hybrid solar cell
The alloy acceptor (indene-C60 bis-adduct (ICBA)/[6,6]-phenyl-C71 -butyric acid-methyl-ester (PC71 BM)) is employed to replace the widely used fullerene acceptor (PC71 BM) in organic solar cells based on five different polymer donors, which exhibit a higher efficiency and much better device stability than the PC71 BM counterpart.
Acceptor
Indene
Cite
Citations (212)
In the molecular optimizations of non-fullerene acceptors (NFAs), extending the central core can tune the energy levels, reduce nonradiative energy loss, enhance the intramolecular (donor-acceptor and acceptor-acceptor) packing, facilitate the charge transport, and improve device performance. In this study, a new strategy was employed to synthesize acceptors featuring conjugation-extended electron-deficient cores. Among these, the acceptor CH-BBQ, embedded with benzobisthiadiazole, exhibited an optimal fibrillar network morphology, enhanced crystallinity, and improved charge generation/transport in blend films, leading to a power conversion efficiency of 18.94 % for CH-BBQ-based ternary organic solar cells (OSCs; 18.19 % for binary OSCs) owing to its delicate structure design and electronic configuration tuning. Both experimental and theoretical approaches were used to systematically investigate the influence of the central electron-deficient core on the properties of the acceptor and device performance. The electron-deficient core modulation paves a new pathway in the molecular engineering of NFAs, propelling relevant research forward.
Acceptor
Electron acceptor
Cite
Citations (57)
Hybrid solar cell
Plasmonic solar cell
Cite
Citations (47)
Acceptor
Cite
Citations (2)
Four acceptor-donor-acceptor (A-D-A)-type molecules bearing indacenodithiophene as donating central core and various end-capping acceptor units have been designed and synthesised as n-type materials suitable for organic solar cells (OSCs). The studied optical and electrochemical properties supported by theoretical calculations revealed that the nature and the strength of the terminal groups exert a decisive influence on the polymer bulk-heterojunction OSC performance.
Acceptor
Cite
Citations (3)
Efficiency enhancements in non-fullerene acceptor-based organic solar cells by post-additive soaking
Power conversion efficiency of non-fullerene acceptor-based organic solar cells based on PBDB-T : ITIC-m (1 : 1) composites has been successfully increased (from 9.6% to 12.3%) by using post-additive soaking (PAS) treatments on pristine BHJ films.
Acceptor
Cite
Citations (19)
Abstract Organic solar cells have the ability to transform solar energy efficiently and have a promising energy balance. Producing these cells is economical and makes use of methods of printing using inks built on solvents that are well-matched with a variety of cheap materials like flexible plastic or paper. The primary materials used to manufacture organic solar cells include carbon-based semiconductors, which are good light absorbers and efficient charge generators. In this article, we review previous research of interest based on morphology of polymer blends used in bulk heterojunction (BHJ) solar cells and introduce their basic principles. We further review computational models used in the analysis of surface behavior of polymer blends in BHJ as well as the trends in the field of polymer surface science as applied to BHJ photovoltaics. We also give in brief, the opportunities and challenges in the area of polymer blends on BHJ organic solar cells.
Hybrid solar cell
Organic semiconductor
Cite
Citations (1)
Acceptor
Active layer
Cite
Citations (9)
Four solution-processable acceptor–donor–acceptor structured organic molecules with isoindigo as terminal acceptor units and different aromatic rigid planar cores as donor units were designed and synthesized as the acceptor materials in organic solar cells (OSCs).
Acceptor
Cite
Citations (19)
Three acceptor–donor–acceptor type fused-ring non-fullerene acceptors of FOR-IN , FOR-1F and FOR-2F , were synthesized with the same pyran-composed backbone but different terminals, affording over 15% efficiency in organic solar cells.
Acceptor
Pyran
Cite
Citations (7)