Effect of Polypyrrole Modified Carbon Fiber on Interfacial Property of Composite PPy-carbon Fiber/epoxy
2
Citation
0
Reference
20
Related Paper
Citation Trend
Keywords:
Polypyrrole
Carbon fiber composite
Carbon fibers
Carbon fibers
Surface Modification
Cite
Citations (15)
Abstract To improve the interfacial performance of poly[p‐phenylene benzobisoxazole] (PBO) fiber and epoxy resin, a modified multiwalled carbon nanotubes (MWCNTs‐Ecp) were used to achieve this purpose through grafting onto PBO fiber surface using a gamma ray radiation method. Experimental results indicated that the equilibrium wetting rate and equilibrium adsorption amount of the modified PBO fiber for epoxy resin and acetone were all higher than that of as received PBO fiber. The interfacial shear strength (IFSS) of single fiber composite increased from 31.4 to 77.5 MPa after modification. The fracture models of composites are changed from pure interfacial failure to combination failure of interface and resin interlayer. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers
Cite
Citations (18)
The performance of carbon fiber-reinforced composites largely depends on the properties of the fiber-matrix interface. Here, to improve the interfacial strength properties of carbon fiber/epoxy composites, we doped different concentrations of Fe2O3/graphene nanosheets onto the interfacial region of the carbon fiber composites by nano-coating technology. With the aid of the magnetic field, the arrangement of nanosheets could be controlled in the interface. The nanosheets can be arranged on the carbon fiber surface parallel or perpendicularly with different concentrations. The tensile strength and interfacial shear strength of the modified fiber microcomposites had increased by 22.1 and 44.4% respectively with 1.0 mg/mL Fe2O3/graphene nanosheets. The results indicated that the Fe2O3/graphene nanosheets have an important influence on the carbon fibers and carbon fibers composites.
Carbon fibers
Cite
Citations (4)
Surface Modification
Cite
Citations (274)
Changes in surface physicochemical structures of polyacrylonitrile‐based carbon fibers resulted from low current density electrochemical oxidation were monitored by scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The relationship between the interlaminar shear strength (ILSS) values of carbon fiber‐reinforced polymers (CFRPs) and carbon fiber surface chemistry including elemental ratios and the relative content of oxygen‐containing functional groups were researched. SEM results revealed that the electrochemical oxidation got rid of surface contaminants generated during the production process. XPS analysis showed that the relative contents of oxygen and nitrogen increased by 446% and 202%, respectively, after the electrochemical oxidation. Carbon fiber surface chemistry was of paramount importance to the interfacial properties of CFRPs. The higher the carbon fiber surface activity, the better the interfacial bonding was, and an increase in the acidic‐group contents was responsible for a higher ILSS value. However, when the current density increased to 1.0 A/m 2 , the interfacial bonding between carbon fiber and the epoxy resin became weak which led to the decline in ILSS values. Copyright © 2012 John Wiley & Sons, Ltd.
Polyacrylonitrile
Carbon fibers
Cite
Citations (34)
Microfiber
Delamination
Cite
Citations (41)
Polypyrrole
Cite
Citations (59)
Abstract Effects of halloysite nanotube (HNT) loading of up to 2% in epoxy resin on its mechanical properties were characterized. The interfacial property of the resin with carbon fiber nanocomposite was also studied. Single fiber composite (SFC) technique was used to characterize the carbon fiber/epoxy resin interfacial shear stress. Carbon fibers were also coated with ammonia/ethylene plasma polymer to obtain a thin coating of the polymer with amine groups that could react with the epoxy and thus improve the interfacial property. The results indicated that the Young's modulus of HNT containing nanocomposites increased slightly up to a loading of 0.25% after which it started to decrease. The tensile strength, however, steadily decreased with increasing of HNT loading although the fracture strain did not change significantly. This might be related to the nanotube shape, size and clustering. The interfacial shear strength (IFSS) was also increased slightly with HNT loading. The ethylene/ammonia plasma polymer coated fibers exhibited significantly higher IFSS by over 150%, independent of the HNT loading. The highest IFSS obtained was almost 79 MPa for plasma treated fibers. The results suggest that the carbon fiber/epoxy interface is not affected by the incorporation of up to 1.5% of HNT. Furthermore, the fiber surface modification through plasma polymerization is an effective method to improve and control the IFSS.
Halloysite
Cite
Citations (18)
Polypyrrole
Cite
Citations (11)