Excellent Thermionic-emission Performances of (Ce$lt;inf$gt;1-x$lt;/inf$gt;Gd$lt;inf$gt;x$lt;/inf$gt;)B$lt;inf$gt;6$lt;/inf$gt; with Ultra-low Work Functions
9
Citation
0
Reference
10
Related Paper
Citation Trend
Abstract:
以三元稀土硼化物Ce 1- x Gd x B 6 为研究对象, 系统研究Gd掺杂对CeB 6 阴极材料热发射性能的影响规律。采用放电等离子烧结结合光学区域熔炼法成功制备了高质量的Ce 1- x Gd x B 6 ( x =0~0.3)单晶体。借助360度Phi扫描单晶衍射仪对生长后的单晶进行了测试, 结果显示单晶质量良好。采用劳埃定向仪确定出(100)晶面, 并测试了该晶面在1673 K、1773 K、1873 K下的热电子发射电流密度。测试结果表明, Ce 0.9 Gd 0.1 B 6 成分单晶体具有最优异的热发射性能, 在1873 K工作温度下, 4000 V电压条件下发射电流密度达到82.3 A/cm 2 , 零场电流发射密度为24.70 A/cm 2 , 平均有效逸出功为2.30 eV, 与相同条件下CeB6单晶体热发射性能(热发射电流密度为78.2 A/cm 2 , 零场电流发射密度为13.32 A/cm 2 )相比, 其具有更大的发射电流密度和更低的逸出功。因此, 采用该制备技术获得的Ce 1- x Gd x B 6 单晶体具有良好的发射性能, 作为热阴极材料将会有更好的应用前景。Relative density
MAX phases
Machinability
Spark Plasma Sintering
Cite
Citations (5)
Cite
Citations (0)
Laser peening
Cite
Citations (18)
Vickers hardness test
Functionally graded material
Cite
Citations (31)
Cite
Citations (10)
Porous SiC Ceramics with Multiple Pore Structure Fabricated via Gelcasting and Solid State Sintering
Porous SiC ceramics with multiple pore structures were fabricated via gelcasting and solid state sintering.A novel gelling agent of Isobam was applied and PMMA was used as both foam stabilizer and pore forming agent.The mechanical properties of porous SiC ceramics were investigated as functions of PMMA content, rotating speed of ball mill, and sintering temperature.With PMMA content increasing from 5wt% to 20wt%, the foaming effect was inhibited while the stability of bubbles increased.When the rotating speed was 220 r/min, the open porosities of the as-prepared SiC ceramics sintered at 2100 varied ℃ from 51.5% to 72.8%, and compressive strength varied from 7.9 to 48.2 MPa.With the rotating speed increasing from 220 to 280 r/min, the foaming effect was aggravated and the porosities of SiC ceramics sintered at 2100 increased.℃ While the sintering temperature increasing from 2050 to 2150 , ℃ the SiC ceramics prepared with PMMA content of 20wt% at rotating speed of 220 r/min decreased in the open porosities while increased in compressive strength.
Cite
Citations (0)
Equiaxed crystals
Cite
Citations (93)
Relative density
Cite
Citations (15)
Ductility (Earth science)
Cite
Citations (1)
Бұл зерттеужұмысындaКaно моделітурaлы жәнеоғaн қaтыстытолықмәліметберілгенжәнеуниверситетстуденттерінебaғыттaлғaн қолдaнбaлы (кейстік)зерттеужүргізілген.АхметЯссaуи университетініңстуденттеріүшін Кaно моделіқолдaнылғaн, олaрдың жоғaры білімберусaпaсынa қоятынмaңыздытaлaптaры, яғнисaпaлық қaжеттіліктері,олaрдың мaңыздылығытурaлы жәнесaпaлық қaжеттіліктерінеқaтыстыөз университетінқaлaй бaғaлaйтындығытурaлы сұрaқтaр қойылғaн. Осы зерттеудіңмaқсaты АхметЯсaуи университетіндетуризмменеджментіжәнеқaржы бaкaлaвриaт бaғдaрлaмaлaрыныңсaпaсынa қaтыстыстуденттердіңқaжеттіліктерінaнықтaу, студенттердіңқaнaғaттaну, қaнaғaттaнбaу дәрежелерінбелгілеу,білімберусaпaсын aнықтaу мен жетілдіружолдaрын тaлдaу болыптaбылaды. Осы мaқсaтқaжетуүшін, ең aлдыменКaно сaуaлнaмaсы түзіліп,116 студенткеқолдaнылдыжәнебілімберугежәнеоның сaпaсынa қaтыстыстуденттердіңтaлaптaры мен қaжеттіліктерітоптықжұмыстaрaрқылыaнықтaлды. Екіншіден,бұл aнықтaлғaн тaлaптaр мен қaжеттіліктерКaно бaғaлaу кестесіменжіктелді.Осылaйшa, сaпa тaлaптaры төрт сaнaтқa бөлінді:болуытиіс, бір өлшемді,тaртымдыжәнебейтaрaп.Соңындa,қaнaғaттaну мен қaнaғaттaнбaудың мәндеріесептелдіжәнестуденттердіңқaнaғaттaну мен қaнaғaттaнбaу деңгейлерінжоғaрылaту мен төмендетудеосытaлaптaр мен қaжеттіліктердіңрөліaйқын aнықтaлды.Түйінсөздер:сaпa, сaпaлық қaжеттіліктер,білімберусaпaсы, Кaно моделі.
Cite
Citations (0)