Study of new rubber to steel adhesive systems based on Co(II) and Cu(II) sulphides coats

The presented paper deals with the preparation of new rubber to steel adhesive systems using the steel surface treatment with deposition of adhesive coats based on Co(II) and Cu(II) sulphides. Efficiency of new prepared adhesive systems containing Co(II) and Cu(II) sulphides has been compared with the efficiency of double layer adhesive system commonly used in industry. The chemical composition of prepared adhesive systems was determined using the EDX analysis. Scanning Electron Microscopy  (SEM) was used for study of topography and microstructure of prepared rubber to steel adhesive systems (Co(II), Cu(II) sulphide, double layer adhesive system). For determination of adhesion strength between rubber blends and metal pieces with various adhesive systems deposited on these pieces, the test according to ASTM D429 standard relating to Rubber to metal adhesion, method A was used. For all test samples, the same type of rubber blend and the same curing conditions have been used. This work is supported by: VEGA No. 1/0589/17, VEGA No. 1/0649/17, KEGA 007TnUAD-4/2017, project ‘‘Center for quality testing and diagnostics of materialsʼʼ, ITMS code 26210120046, Operational Program Research and Development, EF of Reg. Development