On the calibration of cohesive parameters for refractories from notch opening displacements in wedge splitting tests

Abstract Cohesive elements are commonly used to describe crack propagation in heterogeneous materials with toughening mechanisms. This work aims to provide a guideline on how these fracture parameters can be calibrated using notch opening displacements (NODs) measured via digital image correlation and force data from wedge splitting tests (WSTs). Weighted finite element model updating was applied to calibrate material and boundary condition parameters in the same framework. The influence of each parameter on force and NOD data are given together with uncertainties for the calibrated parameters. Numerical results were in very good agreement in terms of splitting force, NOD, displacement and gray level residual fields. It is shown that images obtained during WSTs focusing on the crack path (i.e., hiding the loading region) can be used to drive numerical simulations and obtain cohesive parameters.