지표면 라이다 데이터를 고려한 건물 외곽선 결정

Delineation of accurate object boundaries is crucial to provide reliable spatial information products such as digital topographic maps, building models, and spatial database. In LiDAR(Light Detection and Ranging) data, real boundaries of the buildings exist somewhere between outer-most points on the roofs and the closest points to the buildings among points on the ground. In most cases, areas of the building footprints represented by LiDAR points are smaller than actual size of the buildings because LiDAR points are located inside of the physical boundaries. Therefore, building boundaries determined by points on the roofs do not coincide with the actual footprints. This paper aims to estimate accurate boundaries that are close to the physical boundaries using airborne LiDAR data. The accurate boundaries are determined from the non-gridded original LiDAR data using initial boundaries extracted from the gridded data. The similar method implemented in this paper is also found in demarcation of the maritime boundary between two territories. The proposed method consists of determining initial boundaries with segmented LiDAR data, estimating accurate boundaries, and accuracy evaluation. In addition, extremely low density data was also utilized for verifying robustness of the method. Both simulation and real LiDAR data were used to demonstrate feasibility of the method. The results show that the proposed method is effective even though further refinement and improvement process could be required.