Effect of ferric chloride on phosphorus immobilization and speciation in Dianchi Lake sediments.

Immobilization of phosphorus in lake sediments and control of internal-loading phosphorus release have become crucial aspects of eutrophication lake management. In this study, the immobilization efficiency of phosphorus by ferric chloride in Dianchi Lake sediments was investigated. In addition, effects of the dosage of ferric chloride and contact time on the release of phosphorus from sediments were investigated. Laboratory experiments revealed that ferric chloride can effectively inhibit the release of phosphorus from sediments. At a ferric chloride dosage of 10 mg/g, the total phosphorus concentration of the overlying water was reduced by ~87%. With the increase in the contact time, the amount of phosphorus immobilized by ferric chloride increased. To further evaluate the feasibility of ferric chloride for immobilising phosphorus in sediments, an amplification experiment with a water volume of 50 L was carried out. By the addition of 6 mg/g of ferric chloride, the total phosphorus concentration of the overlying water was still less than 0.01 mg/L after 100 days. At the same time, the phosphorus species in the sediment after treatment with ferric chloride were analyzed. Results revealed that ferric chloride mainly converts unstable exchangeable phosphorus (Ex-P), ferric phosphate (Fe-P) and organic phosphorus (Or-P) into more stable occluded phosphate (O-P), reducing the possible release of phosphorus from sediments. Practical applications of ferric chloride to control the release of phosphorus from Dianchi Lake sediments were discussed.