Ultrafast and simultaneous removal of anionic and cationic dyes by nanodiamond/UiO-66 hybrid nanocomposite

Abstract In this research, UiO-66 and its composite nanoparticles with thermally oxidized nanodiamond (OND) were synthesized via a simple solvothermal method and utilized as solid adsorbent for the removal of anionic methyl red (MR) dye and cationic malachite green (MG) dye from contaminated water. The synthesized adsorbents were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), N2 adsorption–desorption, and zeta potential analyzer. The influences of various factors such as initial concentrations of the dyes, adsorption process time, solution pH, solution temperature and ionic strength on adsorption behavior of MR dye onto OND-UiO hybrid nanoparticle were investigated. The adsorption of MR onto OND-UiO hybrid nanoparticle could be well described by Langmuir isotherm model. Meanwhile, pseudo-second order kinetic model was found to be suitbale for illustration of adsorption kinetics of MR onto OND-UiO. Thermodynamic investigation suggeted that the adsorption process was spontaneous and endothermic, and controlled by an entropy change instead of enthalpy effect. The experimental adsorption results indicated that OND-UiO hybrid nanoparticle could simultaneously adsorb 59% of MR and 43% of MG from the mixture of both dyes in only 2 minutes showing synergistic effect compared with single UiO-66 and OND nanoparticles in terms of adsorption rate and removal capacity of anionic dyes. The appropriate removal efficiency, rapid adsorption kinetic, high water stability, and good reusability make OND-UiO hybrid nanoparticle attractive candidate for simultaneously removal of both anionic MR and cationic MG dyes from wastewater.