Phase Equilibria in the Cu2Se−SnSe−CuSbSe2 System
2019
Phase equilibria in the Cu2Se−SnSe−CuSbSe2 system were studied by differential thermal and X-ray powder diffraction analyses. Alloys were obtained by alloying of the preliminarily synthesized and identified initial compounds in a vacuum with subsequent annealing at 650 K for 500 h. Characteristic plots describing this system were constructed, namely, the polythermal sections SnSe−Cu3SbSe3, Cu2Se−[A], and CuSbSe2−[B], where [A] and [B] are the alloys of the compositions (SnSe)0.5(CuSbSe2)0.5 and (Cu2Se)0.5(SnSe)0.5, respectively; the isothermal section of the phase diagram at 300 K; and the projection of the liquidus surface. It was shown that this system is a quasi-ternary section of the quaternary system Cu−Sn−Sn−Se and is characterized by invariant equilibria: a transient one and a eutectic one. Fields of primary crystallization of phases and the types and coordinates of in- and monovariant equilibria were found. Wide regions of solid solutions based on SnSe and CuSbSe2 were revealed.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
35
References
4
Citations
NaN
KQI